Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).The MITSUBISHI A series PLC is connected to GP, length: 5 m.Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) CA3-BLU12-01 CA3-BLU12-01 Connector for connecting DC power cord. (right angle, 5 / set)For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output CA3-BLU12-01. AUX connector, L typeDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-BLU12-01. (1)Used in a variety of host and man-machine interface for RS-422 connection1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Porrtable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) CA3-BLU12-01. A1/A2/B+ DIO Type connector (welding type) (5 / set)Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. Connect to PC, trannsfer screen data and user programs CA3-BLU12-01. I/O module, including 32 point NPN/PNP inputUsed to connect the SIEMENS S5 PLC series to the host computer interface