5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.GP3000H replacement label (5 sheets / set)Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) CA5-BLU10T-01 CA5-BLU10T-01 12.1 inch screen protective cover (1 pieces)Protection for GP rear connectors (large and small for each of the 1).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)12 CA5-BLU10T-01. 1 inches, replace the backlight (1 / set)Connect to PC, transfer screen data and user programs.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Portable GP2000H series models accessories, RS-232 single head cable (10 m).AUX connector for external output (5 / set).12.1 inches /10 CA5-BLU10T-01. 4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.3.5 inch screen protective cover (1 pieces)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.The MITSUBISHI Q series PLC is connected to GP, length: 5 m.15 inches, replaced by a host of backlight (1).Disposable battery (1 blockks) for backing up clock data CA5-BLU10T-01. The nut for mounting the display module (10 / set).Length: 3 meters5.7 inches, replace the backlight (1 / set)The main controller is connected to the man-machine interface for MPI communicationWhen the mann-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA5-BLU10T-01. (1)Cable for connecting GP3000 to various modules