The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Touch screen anti ultraviolet protective film (1 pieces).For RGB input USB cable to prevent disconnection (2 / set)GP3000H portable slingExtension cable for connecting USB (Mini-B) interface to front panel CA3-BLU15-01. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter CA3-BLU15-01
Length of 3 meters. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) CA3-BLU15-01. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Durable cable for connecting GP3000H adapter and GP3000H.12.1 inches, replaced by a host of backlight (1).Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) CA3-BLU15-01. Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12 way 2 digital signals into analog signals and output resultsUsed in a variety of host and man-machine interface for RS-232C connectionUsed to install the GP3000H series to a commercially available support arm or panel.For 5.7 inch models, connect thhe connector to the DIO interface CA3-BLU15-01. For connecting external I/O devices. (5 / set)Extension cable for connecting USB (Type-A) interface to front panel.3 / sets5.7 inches thin film used for surface protection of man-machine interface fromm fingerprints, water droplets, dust and oil pollution (5 / set) CA3-BLU15-01. Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.