LK Automation Limited LK Automation Limited
Brand: Proface
Go Back >> Product Catalogues
ZCACNDCS1 DC power adapter

Proface ZCACNDCS1 Product information and technical parameters:
Brand: Proface
Name: DC power adapter
Model: ZCACNDCS1
Connector for connecting DC power cord (5)

For the elastic display module installation nut wrench (1 / set).Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station12.1 inch /10 ZCACNDCS1. 4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) ZCACNDCS1Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.Extension cable for connecting USB (Mini-B) interface to front panel.GP4000 series back mounted model of waterproof rubber gasket. (1)3 / setsThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail ZCACNDCS1. Portable GP2000H series models accessories, RS-422 single head cable (10 m).Suitable for A/B+ Type modelsLength: 5 meters.A connector that connects the DIO interface for connecting an external I/O device (5 sets).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port ZCACNDCS1. Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointSuitable for LT4000M/GP4000M series modules, 3.5 inch.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).For RGB input USB cable to prevent disconnection (2 / set)A1/A2/B+ DIO Type connector (welding type) (5 / set)12 way 4 digital signals into analog signals and output resultsCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionInput / output hybrid I/O modules, including 16 poiint NPN/PNP input and 16 point PNP transistor outputFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: termiinal block ZCACNDCS1 ZCACNDCS1. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters.


...More relevant models >>>>
Related download