LK Automation Limited
Brand:
Proface
PFXZLMCBRJR21 RS-232C RJ45 cable (5 m)
Proface PFXZLMCBRJR21 Product information and technical parameters：
Brand: Proface
Name: RS-232C RJ45 cable (5 m)
Model: PFXZLMCBRJR21
One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.
Apply to GLC-2600/2500Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceA1/A2/B+ DIO Type connector (compression type) (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) PFXZLMCBRJR21. Note: joints A and B are different, the joints C and D different PFXZLMCBRJR21Suitable for GLC2300 seriesFor the elastic display module installation nut wrench (1 / set).7.0/7.5 inch screen protective cover (1 pieces)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)For 5 PFXZLMCBRJR21. 7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Connector for connecting DC power cord (5)Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PFXZLMCBRJR21. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceClock battery, save system date and time when power is off.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) PFXZLMCBRJR21. GLC2300 is not availableThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port PFXZLMCBRJR21. 5 / setsThe nut for mounting the display module (10 / set).Touch screen anti ultraviolet protective film (1 pieces).
Length: 5 meters. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PFXZLMCBRJR21. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceClock battery, save system date and time when power is off.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) PFXZLMCBRJR21. GLC2300 is not availableThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port PFXZLMCBRJR21. 5 / setsThe nut for mounting the display module (10 / set).Touch screen anti ultraviolet protective film (1 pieces).
...More relevant models >>>>
Related download