USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Connector for connecting a serial port (1)10.4 inches (TFT), the replacement of the host backlight (1).5 / setsUsed to prevent disconnection of the connection (1 interface, 5 / set).Touch screen anti ultraviolet protective film (1 pieces) PFXZCETWW1. For the elastic display module installation nut wrench (1 / set) PFXZCETWW1For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used in a variety of host and man-machine interface for RS-232C connectionMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.The main controller is connected to the man-machine interface of the host, for MPI communicationUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PFXZCETWW1. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.For 5.7 inch models, for fixing the hooks of the three EX modules.Connector for connecting DC power cord (5 / set) PFXZCETWW1. Used to prevent accidental operation. Includes 3 mounting screws.COM2 adapter for converting the COM2 interface to the RS-422 terminal blockFor the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.When the man-machine interface is installed to the hard panel to provide dust and moisture proof functioon (1)For 5 PFXZCETWW1. 7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Used to install the human machine interface to the fixed panel (2 / cover).Disposable battery (1 blocks) for backing up clock data PFXZCETWW1. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters.