Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Disposable battery (1 blocks) for backing up clock data.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA5-USBEXT-01 CA5-USBEXT-01 3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.15 inches, replaced by a host of backlight (1).Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) CA5-USBEXT-01. Adapter for EX module (5 / set)To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Used to connect the 2-Port adapter to GP4000Apply to GLC-2600/2500Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputUsed to install the human machine interface to the fixed panel (2 / cover) CA5-USBEXT-01. The MITSUBISHI A series PLC is connected to GP, length: 5 m.Connect to PC, transfer screen data and user programs.12 way 2 digital signals into analog signals and output resultsGP2500S useUsed to prevent disconnection of the connection (1 interface, 5 / set).Slave station module for connecting support for CANopenDigital small keyboard with USB interface.For RGB input USB cable to prevent disconnection (2 / set)Protection for GP rear connectors (large and small for each of the 1).Touch screen anti ultraaviolet protective film (1 pieces) CA5-USBEXT-01. Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Data transmission cable between host and LT series. Length: 5 meters.For 3.8 inch mmodels, prevent cable loose from the USB cable fastening clip (5 / set) CA5-USBEXT-01. Interface module for the simultaneous use of A/QnA/FX series external controller