LK Automation Limited
Brand:
Proface
GP430-IP11-O MITSUBISHI FX series PLCCPU interface cable
Proface GP430-IP11-O Product information and technical parameters：
Brand: Proface
Name: MITSUBISHI FX series PLCCPU interface cable
Model: GP430-IP11-O
For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.
The main controller is connected to the man-machine interface for MPI communicationFor the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. 2 / setsThe main controller is connected to the man-machine interface for MPI communicationTouch screen anti ultraviolet protective film (1 pieces) GP430-IP11-O GP430-IP11-O Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).Interface module for the simultaneous use of A/QnA/FX series external controllerThe PC adapter for PCMCIA slot read CF card required.A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 single head cable (3 m) GP430-IP11-O. GLC2300 is not availableThe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. SD memory card (4GB, MLC, CLASS4).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) GP430-IP11-O. Note: joints A and B are different, the joints C and D different.Backup battery for time and data backup (1).Connector for connecting DC power cord. (linear, 5 / set)5 / sets5.7 inches, installed to provide the function of dust and moistureDisposable battery (1 blocks) for backing up clock data.Used to output the image signal from the host computer to GP4.3 Inch Touch Screen anti UV protective film (1 pieces).12.1 inch screen protective cover (1 pieces)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.10.4 inch screenn protective cover (1 pieces)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputDirect interface Matsushita Electric PLC FP series CPU port GP430-IP11-O. 10.4 inches (TFT), replace the backlight (2 // set)LT seal on the control panel GP430-IP11-O. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters.
Length: 3 meters. 2 / setsThe main controller is connected to the man-machine interface for MPI communicationTouch screen anti ultraviolet protective film (1 pieces) GP430-IP11-O GP430-IP11-O Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).Interface module for the simultaneous use of A/QnA/FX series external controllerThe PC adapter for PCMCIA slot read CF card required.A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 single head cable (3 m) GP430-IP11-O. GLC2300 is not availableThe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. SD memory card (4GB, MLC, CLASS4).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) GP430-IP11-O. Note: joints A and B are different, the joints C and D different.Backup battery for time and data backup (1).Connector for connecting DC power cord. (linear, 5 / set)5 / sets5.7 inches, installed to provide the function of dust and moistureDisposable battery (1 blocks) for backing up clock data.Used to output the image signal from the host computer to GP4.3 Inch Touch Screen anti UV protective film (1 pieces).12.1 inch screen protective cover (1 pieces)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.10.4 inch screenn protective cover (1 pieces)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputDirect interface Matsushita Electric PLC FP series CPU port GP430-IP11-O. 10.4 inches (TFT), replace the backlight (2 // set)LT seal on the control panel GP430-IP11-O. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters.
...More relevant models >>>>
Related download