7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Connect to USB printer (Type-B).Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable GP230-IS12-O. (5 / set)Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter GP230-IS12-OPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Protection for GP rear connectors (large and small for each of the 1).7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Touch screen anti ultraviolet protective film (1 pieces) GP230-IS12-O. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.Suitable for LT4000M/GP4000M series modules, 5.7 inch. Interface module for the simultaneous use of A/QnA/FX series external controller15 inches, replaced by a host of backlight (1) GP230-IS12-O. Adapter for EX module (5 / set)COM1 interface with the cable for direct connection to the CPU series PLC Q10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.15 inches, GP installed to the hard panel to provide dust and moisture proof function.A veneer, for the GP4000 series back looading models of full flush (white, 1)The nut for mounting the display module (10 / set) GP230-IS12-O. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Apply to GLC-2600/250010.4 inch TFT models applicable parts, for the 10 GP230-IS12-O. 4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.