COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorApply to GLC-2600/250013 pin input connectors for HTB and 16 pin output connectors. (1 / set)COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionColorful LED switch with USB interface CA8-ODP10-01. LT4000M (module type DIO), PNP output, DC24V (host) CA8-ODP10-0110.4 inches (TFT), the replacement of the host backlight (1).To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected CA8-ODP10-01. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) CA8-ODP10-01. USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.LT4000M (module type DIO), NPN output, DC24V (host).Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN traansistor output3 CA8-ODP10-01. 4 Inch Touch Screen anti UV protective film (1 pieces).Used to install the human machine interface to the fixed panel (2 / cover).The installation of accessories, adjust the size of the GP-411xT panel with the same sizee of the GP-410xG/W, easy to replace CA8-ODP10-01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station