Suitable for A/B+ Type models1-0 DVI standard (DVI-D 24 pin convex connector)Used to prevent accidental operation. Includes 3 mounting screws.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Use external output for the GP3000 series of auxiliary connectors (5 / sets) CA4-DCMDL-01. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfacePortable GP2000H series models accessories, RS-422 single head cable (3 m) CA4-DCMDL-01256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.12.1 inches, replaced by a host of backlight (1) CA4-DCMDL-01. Colorful LED switch with USB interface.Connector for connecting DC power cord. (right angle, 5 / set)5.7 inches, installed to provide the function of dust and moistureFor the man-machine interface hanging in the neck lanyard.COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA4-DCMDL-01. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Extended cable for connecting USB (Type-A) (LT) interface.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Cable for connecting GP3000 to various modulesUsed to convert the USB interface to the serial interface (RS-232C). CA4-DCMDL-01. A modem or bar code reader that can be connected to support RS-232C.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. Some types of PLC are not connected. Length: 5 meters.Length: 5 meters.Input / output hyybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputFor 5 CA4-DCMDL-01. 7 inch models, for fixing the hooks of the three EX modules.