5.7 inches, replace the backlight (1 / set)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceOne end is a loose wire, which is used to carry out RS-485 connection between the host and LT.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA5-DCCNM-01 CA5-DCCNM-01 7.4 inches, replace the backlight (1 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Touch screen anti ultraviolet protective film (1 pieces).Connector for connecting DC power cord (5 / set) CA5-DCCNM-01. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.USB cable clamp for preventing disconnection of connection (5 / set)Memory for extending EX GP-Pro alarm and character table functions.Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.For 5.7 inch models, for the 5 CA5-DCCNM-01. 7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Touch screen anti ultraviolet protective film (1 pieces).Extension cable for connecting USB (Mini-B) interface to front panel.GP3000H replacement label (5 sheets / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.LT4000M (module type DIO), PNP output, DCC24V (host) CA5-DCCNM-01. Converting 2 analog signals into digital signalsTo prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)12.1 inch screen protective cover (1 pieces)Used to connect the GP2000H seeries RS-422 conversion adapter with GP3000H, with D-Sub connectors CA5-DCCNM-01.
Length: 3 meters. For the elastic display module installation nut wrench (1 / set).