Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)LT seal on the control panel CA3-BUSCVR-01. Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output CA3-BUSCVR-01 Up to 7 EX modules can be connected.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Touch screen anti ultraviolet protective film (1 pieces).Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputAdapter for converting an audio output portion of a AUX adapter into a Jack Pin socket CA3-BUSCVR-01. GP2500S use12 way 4 digital signals into analog signals and output resultsThe Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1LT4000M (module type DIO), NPN output, DC24V (host).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA3-BUSCVR-01. Memory for extending EX GP-Pro alarm and character table functions.10.4 inches (STN), the replacement of the host backlight (2 / set).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Used in a variety of host and man-machine interface for RS-422 connectionCaable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) CA3-BUSCVR-01. Suitable for A/B+ Type models7.4 inches, replace the backlight (1 / set)COM1 interface with the cabble (RS-232C), used to connect directly to the Q series connection module (or other host)12 way 2 digital signals into analog signals and output results