For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.LT4000M (module type analog), NPN output, DC24V (host).10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA3-CBLQ-01. Some types of PLC are not connected. Length: 5 meters.AUX connector for external output (5 / set) CA3-CBLQ-01For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.One end is a loose wire, which is used to carry out RS-485 connection between the host and LT CA3-CBLQ-01. 5.7 inches, installed to provide the function of dust and moistureThe installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceAdapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.10.4 inches (TFT), replace the backlight (2 / set)I/O expansion module, including the 8 point relay /1 public endUSB cable clamp for preventing disconnection of connection (5 / set)To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Portable GP2000H series models accessories, RS-232 single head cable (3 m) CA3-CBLQ-01. 7.0/7.5 inch screen protective cover (1 pieces)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)10. CA3-CBLQ-01. 4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).Durable cable for connecting GP3000H adapter and GP3000H.NETWORK FLEX 64 point DIO connector terminal block, (including 2)1-0 DVI standard (DVI-D 24 pin convex connector)For 3 CA3-CBLQ-01. 8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)