LT seal on the control panel.Extension cable for connecting USB (Mini-B) interface to front panel.(serial communication terminal adapter is included in the product package)Touch screen anti ultraviolet protective film (1 pieces).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to prevent accidental operation CA3-ADPSEI-01. Includes 3 mounting screws CA3-ADPSEI-01Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Slave station module for connecting support for CANopenWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models CA3-ADPSEI-01. (2 / set)10.4 inches (TFT), the replacement of the host backlight (1).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Adapter for EX module (5 / set)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Touch panel operation for RGB input modules (Master - from: Mini-B)The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display CA3-ADPSEI-01. For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).For the DVI input to GP300012.1 inches, replace the backlight (1 / set)SD memory card (4GB, MLC, CLASS4).10.4 inches (TFT), replace the backlight (2 / set)Clock battery, save system date and time when power is off.The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace CA3-ADPSEI-01. Connector for connecting DC power cord. (right angle, 5 / set)7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture prooff function CA3-ADPSEI-01. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters.