For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.12.1 inches, replace the backlight (1 / set)Suitable for LT4000M/GP4000M series modules, 3 PFXZXMADSA1. 5 inch.For the operation screen (5 pieces) (GP3000H standard).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m PFXZXMADSA1When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)15 inches, replaced by a host of backlight (1).Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) PFXZXMADSA1. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) PFXZXMADSA1. AUX connector for external output (5 / set).Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. NETWORK FLEX 64 point DIO connector terminal block, (including 2)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).The nut for mounting the display module (10 / set).10.4 inch TFT models applicable parts, for the 10 PFXZXMADSA1. 4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).For the man-machine interfacee hanging in the neck lanyard PFXZXMADSA1. A1/A2/B+ DIO Type connector (compression type) (5 / set)USB cable to prevent disconnection of the fastening clip (5 / set)