Durable cable for connecting GP3000H adapter and GP3000H.Used to install the human machine interface to the fixed panel (2 / cover).Portable GP2000H series models accessories, RS-422 single head cable (10 m).12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) PFXZCFUV101. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine PFXZCFUV101For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m PFXZCFUV101. 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Touch screen anti ultraviolet protective film (1 pieces).Cable for connecting GP3000 to various modulesGP3000H portable slingWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)The main controller is connected to the man-machine interface for MPI communication256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card PFXZCFUV101. Length: 5 meters.Used to convert RGB to DVI-AExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceInnput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputCOM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)5 PFXZCFUV101. 7 inches, GP installeed to the hard panel to provide dust and moisture proof function PFXZCFUV101. 5.7 inches, replace the backlight (1 / set)12.1 inches, replace the backlight (1 / set)