LK Automation Limited
Brand:
Proface
PFXZCCWG10W1 10 inch (inch) waterproof rubber washer
Proface PFXZCCWG10W1 Product information and technical parameters：
Brand: Proface
Name: 10 inch (inch) waterproof rubber washer
Model: PFXZCCWG10W1
When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)
NETWORK FLEX 64 point DIO connector terminal block, (including 2)LT4000M (module type DIO), PNP output, DC24V (host).COM2 terminal adapter for communication through the RS-422/485 connection12.1 inches, replaced by a host of backlight (1).For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) PFXZCCWG10W1. Use external output for the GP3000 series of auxiliary connectors (5 / sets) PFXZCCWG10W1Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Portable GP2000H series models accessories, RS-422 single head cable (3 m) PFXZCCWG10W1. Length: 5 meters.10.4 inches and above, used to connect the power cord (5 / set).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. 10.4 inches (TFT), the replacement of the host backlight (1).Direct interface Matsushita Electric PLC FP series CPU port.Slave station module for connecting support for CANopenTouch screen anti ultraviolet protective film (1 pieces) PFXZCCWG10W1. 5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.Extension cable for connecting USB (Mini-B) interface to front panel.Connect to USB printer (Type-B).Used to display analog RGB (2 channels) on the GP3000Used to install the GP3000H series to a commercially available support arm or panel.The MITSUBISHI A series PLC is connected to GP, length: 5 m.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceCOMM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface PFXZCCWG10W1. 1GB, for the implementation of the picture save, log and data backup and oother data management operations, such as compression flash memory card PFXZCCWG10W1. Interface module for the simultaneous use of A/QnA/FX series external controller
Length of 10 meters. To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Portable GP2000H series models accessories, RS-422 single head cable (3 m) PFXZCCWG10W1. Length: 5 meters.10.4 inches and above, used to connect the power cord (5 / set).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. 10.4 inches (TFT), the replacement of the host backlight (1).Direct interface Matsushita Electric PLC FP series CPU port.Slave station module for connecting support for CANopenTouch screen anti ultraviolet protective film (1 pieces) PFXZCCWG10W1. 5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.Extension cable for connecting USB (Mini-B) interface to front panel.Connect to USB printer (Type-B).Used to display analog RGB (2 channels) on the GP3000Used to install the GP3000H series to a commercially available support arm or panel.The MITSUBISHI A series PLC is connected to GP, length: 5 m.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceCOMM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface PFXZCCWG10W1. 1GB, for the implementation of the picture save, log and data backup and oother data management operations, such as compression flash memory card PFXZCCWG10W1. Interface module for the simultaneous use of A/QnA/FX series external controller
...More relevant models >>>>
Related download