For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.NETWORK FLEX 64 point DIO connector terminal block, (including 2)COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface PFXZCBSD4GC41. A veneer, for the GP4000 series back loading models of full flush (white, 1)For 5 PFXZCBSD4GC417 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Apply to GLC-2600/2500Connect to PC, transfer screen data and user programs.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) PFXZCBSD4GC41. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)12.1 inch screen protective cover (1 pieces)AUX connector for external output (5 / set).Used to prevent disconnection of the connection (1 interface, 5 / set).Used to install the GP3000H series to a commercially available support arm or panel PFXZCBSD4GC41. OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.LT4000M (module type DIO), NPN output, DC24V (host).LT4000M (module type analog), NPN output, DC24V (host).GP3000H portable slingConnector for connecting DC power cord (5)Backup battery for time and data backup (1).GP4000 series back mounted model of waterproof rubber gasket. (1)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Cable for transmitting an image signal from an Pro-facce host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) PFXZCBSD4GC41. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.Used to install the human machine interface to the fixed panel (2 / cover) PFXZCBSD4GC41. The main controller is connected to the man-machine interface of the host, for MPI communication