Used to prevent disconnection. (1 interface, 5 / set)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port PFXZCBDS72. For connecting GP operation data with RS-422 and power /DIO terminals PFXZCBDS72For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Used to install the GP3000H series to a commercially available support arm or panel PFXZCBDS72. I/O module, including 32 point NPN/PNP inputSuitable for LT4000M/GP4000M series modules, 3.5 inch.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.For the man-machine interface hanging in the neck lanyard PFXZCBDS72. Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Connector for connecting DC power cord (5 / set).LT4000M (module type DIO), NPN output, DC24V (host).Colorful LED switch with USB interface.7.0/7.5 inch screen protective cover (1 pieces)Connector for connecting DC power cord (5)For the elastic display module installation nut wrench (1 / set).COM2 terminal adapter for communication through the RS-422/4485 connectionAdapter for EX module (5 / set)(serial communication terminal adapter is included in the product package)The main controller is connected to the man-machine interface for MPI communicationDirect interface Matsushita Electricc PLC FP series CPU port PFXZCBDS72 PFXZCBDS72. For RGB input USB cable to prevent disconnection (2 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).