LK Automation Limited LK Automation Limited
Brand: Proface
Go Back >> Product Catalogues
GP3000H-EMGD-01 Emergency stop switch protection case

Proface GP3000H-EMGD-01 Product information and technical parameters:
Brand: Proface
Name: Emergency stop switch protection case
Model: GP3000H-EMGD-01
Used to prevent accidental operation. Includes 3 mounting screws.

For multi connection communication, length: 5 meters.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor the elastic display module installation nut wrench (1 / set).The MITSUBISHI A series PLC is connected to GP, length: 5 m.Adapter for EX module (5 / set)2 / setsSlave station module for connecting support for CANopen10 GP3000H-EMGD-01. 4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) GP3000H-EMGD-0110.4 inches (TFT), replace the backlight (2 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)Used to convert RGB to DVI-ACOM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)LT4000M (module type DIO), PNP output, DC24V (host) GP3000H-EMGD-01. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Used to output the image signal from the host computer to GP10.4 inch screen protective cover (1 pieces)Cable for connecting GP3000 to various modulesSD memory card (4GB, MLC, CLASS4) GP3000H-EMGD-01. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).For the DVI input to GP3000When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)3 / setsConnector for connecting DC powwer cord (5 / set) GP3000H-EMGD-01. 7.0/7.5 inch screen protective cover (1 pieces)Used to install the GP3000H series to a commercially available support arm or panel.Length: 3 metersThe main body module and the separate display module are used for cconnecting the main machine module and the separate display module in the DIN guide rail GP3000H-EMGD-01. 7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)


...More relevant models >>>>