A veneer, for the GP4000 series back loading models of full flush (white, 1)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).For the operation screen (5 pieces) (GP3000H standard).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters GP3000H-CBLSD232-10M GP3000H-CBLSD232-10M Used to install the human machine interface to the fixed panel (2 / cover).COM1 interface with the cable for direct connection to the CPU series PLC AWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Memory for extending EX GP-Pro alarm and character table functions GP3000H-CBLSD232-10M. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.The main controller is connected to the man-machine interface for MPI communicationUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) GP3000H-CBLSD232-10M. GP3000H replacement label (5 sheets / set)Durable cable for connecting GP3000H adapter and GP3000H.GP3000H portable sling5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.For RGGB input USB cable to prevent disconnection (2 / set)5 / setsTo prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Converting 4 analog signals into digital signalsThe man-machine iinterface directly connected MITSUBISHI electric PLC Q series CPU programming port GP3000H-CBLSD232-10M GP3000H-CBLSD232-10M. Data transmission cable between host and LT series. Length: 5 meters.