LT4000M (module type DIO), PNP output, DC24V (host).7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeUsed to install the man-machine interface to the fixed panel. (4 / set)Used in a variety of host and man-machine interface for RS-422 connection5 GLC-DIOCN03. 7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) GLC-DIOCN03The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters GLC-DIOCN03. 12 way 4 digital signals into analog signals and output results7.4 inches, replace the backlight (1 / set)For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).LT fasteners installed on the control panel (4 / set)2 / setsStandard cable for connecting GP3000H adapter and GP3000H GLC-DIOCN03.
Length: 3 meters. 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.B/B+/C FLEX NETWORK Type connector (5)Connector for connecting DC power cord. (linear, 5 / set)CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Touch panel operation for RGB input modules (Master - from: Mini-B)For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)DData transmission cable between host and LT series GLC-DIOCN03. Length: 5 meters.128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Portable GP2000H seriies models accessories, RS-232 cable with D-Sub connector (3 meters) GLC-DIOCN03. The main controller is connected to the man-machine interface for MPI communication