LK Automation Limited LK Automation Limited
Brand: Proface
Go Back >> Product Catalogues
FN-XY16SC41 16 point NPN/PNP input and 16 point PNP transistor output
Proface FN-XY16SC41 Manual And Instructions
FN-XY16SC41 User's Manual
FN-XY16SC41 User's Manual

Proface FN-XY16SC41 Product information and technical parameters:
Brand: Proface
Name: 16 point NPN/PNP input and 16 point PNP transistor output
Model: FN-XY16SC41
Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output

COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceSlave station module for connecting support for CANopenCOM1 interface with the cable for direct connection to the CPU series PLC QUSB cable clamp for preventing disconnection of connection (5 / set)7 FN-XY16SC41. 4 inches, replace the backlight (1 / set)GP2500S useFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters FN-XY16SC41One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.10.4 inches (TFT), the replacement of the host backlight (1).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) FN-XY16SC41. Touch screen anti ultraviolet protective film (1 pieces).7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.Touch screen anti ultraviolet protective film (1 pieces).For 5.7 inch models, for fixing the hooks of the three EX modules.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) FN-XY16SC41. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.SD memory card (4GB, MLC, CLASS4).B/B+/C FLEX NETWORK Tyype connector (5)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters FN-XY16SC41. For thin film surface protection of man-machine interface from fingerprints, water dropletss, dust and oil pollution (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function FN-XY16SC41. (1)


...More relevant models >>>>