Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)USB cable to prevent disconnection of the fastening clip (5 / set)2 / setsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12.1 inch /10 FN-CABLE2010-31-MS. 4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) FN-CABLE2010-31-MSAdapter for EX module (5 / set)The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1Used to prevent disconnection of the connection (1 interface, 5 / set).1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card FN-CABLE2010-31-MS. 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Suitable for A/B+ Type models2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card FN-CABLE2010-31-MS. Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputFor 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Touch screen anti ultraviolet protective film (1 pieces).128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.10.4 inches and above, used to connect the power cord (55 / set) FN-CABLE2010-31-MS. The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.COM1 pin adappter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface FN-CABLE2010-31-MS.