Portable GP2000H series models accessories, RS-232 single head cable (10 m).Adapter for EX module (5 / set)LT4000M (module type DIO), NPN output, DC24V (host).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Converting SIO to RS-422 terminal block7 CA8-USBATALL-01. 4 inches, replace the backlight (1 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter
CA8-USBATALL-01
Length of 10 meters. 12.1 inch screen protective cover (1 pieces)Adapter for EX module (5 / set)Cable for connecting GP3000 to various modulesGP3000H replacement label (5 sheets / set)Used to connect the SIEMENS S5 PLC series to the host computer interfaceData transmission cable between host and LT series CA8-USBATALL-01. Length: 5 meters.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.10.4 inch screen protective cover (1 pieces)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT CA8-USBATALL-01. 5 / sets128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).5.7 inches, installed to provide the function of dust and moistureWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) CA8-USBATALL-01. Disposable battery (1 blocks) for backing up clock data.When the man-machine interface is installed to the fixed panel to provide dust prooof and moisture proof function CA8-USBATALL-01. (1)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters.