The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Converting 2 analog signals into digital signalsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface CA8-CFCALL/2GB-01. 10.4 inches (TFT), the replacement of the host backlight (1) CA8-CFCALL/2GB-01Cable for connecting GP3000 to various modulesA veneer, for the GP4000 series back loading models of full flush (white, 1)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA8-CFCALL/2GB-01. 12 way 2 digital signals into analog signals and output resultsConnect to PC, transfer screen data and user programs.GP2500S useWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)7.0/7.5 inch screen protective cover (1 pieces)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationCOM1 interface with the cable for direct connection to the CPU series PLC QOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT CA8-CFCALL/2GB-01. 5.7 inch screen protective cover (1 pieces)Suitable for LT4000M/GP4000M series modules, 5.7 inch. Used to connect the 2-Port adapter to GP4000Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointDurable cable for connecting GP3000H adapter and GP3000H.When the man-machiine interface is installed to the fixed panel to provide dust proof and moisture proof function CA8-CFCALL/2GB-01. (1)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.When the man-machine interface is installed to the fixxed panel for providing dust proof and moisture proof function (1 pieces) CA8-CFCALL/2GB-01. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters.