COM1 interface with the cable for direct connection to the CPU series PLC ATransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Cable for connecting GP3000 to various modulesCOM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceStandard cable for connecting GP3000H adapter and GP3000H CA7-USBAT-01 CA7-USBAT-01
Length: 3 meters. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.I/O expansion module, including the 8 point relay /1 public endFor the operation screen (5 pieces) (GP3000H standard).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA7-USBAT-01. 10.4 inches (TFT), the replacement of the host backlight (1).A connector that connects the DIO interface for connecting an external I/O device (5 sets).Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)A1/A2/B+ DIO Type connector (welding type) (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to install the human machine interface to the fixed panel (2 / cover) CA7-USBAT-01. For the elastic display module installation nut wrench (1 / set).Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, MMini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) CA7-USBAT-01. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.GP3000H replaacement label (5 sheets / set)Suitable for LT4000M/GP4000M series modules, 5 CA7-USBAT-01. 7 inch. GP2500S useLT4000M (module type analog), PNP output, DC24V (host).