12.1 inches, replace the backlight (1 / set)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA6-EXMCNRS10P-01. 1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA6-EXMCNRS10P-01Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (TFT), the replacement of the host backlight (1).Connector for connecting DC power cord (5 / set) CA6-EXMCNRS10P-01. Connector for connecting DC power cord. (right angle, 5 / set)LT4000M (module type analog), NPN output, DC24V (host).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockInterface module for the simultaneous use of A/QnA/FX series external controllerStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter CA6-EXMCNRS10P-01.
Length of 3 meters. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface10.4 inch screen protective cover (1 pieces)Used to prevent disconnection of the connection (1 interface, 5 / set).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN ttransistor outputConverting SIO to RS-422 terminal blockLength: 3 metersBackup battery for time and data backup (1) CA6-EXMCNRS10P-01. Connect to USB printer (Type-B).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-SSub connectors CA6-EXMCNRS10P-01.
Length: 10 meters. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)