Suitable for LT4000M/GP4000M series modules, 3.5 inch.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable CA6-DNSALL/EX-01. (5 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets) CA6-DNSALL/EX-01COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Used to connect the 2-Port adapter to GP400015 inches, replaced by a host of backlight (1).GLC2300 is not availableScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) CA6-DNSALL/EX-01. Suitable for LT4000M/GP4000M series modules, 5.7 inch. 7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes CA6-DNSALL/EX-01. 10.4 inches and above, used to connect the power cord (5 / set).Portable GP2000H series models accessories, RS-422 single head cable (3 m).Touch screen anti ultraviolet protective film (1 pieces).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockCFast cards (32GB, SLC,) inserted in the CFast slot for storage.Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU proggramming port CA6-DNSALL/EX-01. SD memory card (4GB, MLC, CLASS4).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.The main controller is connected to the man-machine interface for MPI communicationMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA6-DNSALL/EX-01.