Durable cable for connecting GP3000H adapter and GP3000H.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)CFast cards (32GB, SLC,) inserted in the CFast slot for storage CA5-DFS10-01 CA5-DFS10-01 The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Colorful LED switch with USB interface.The main controller is connected to the man-machine interface of the host, for MPI communicationApply to GLC-2600/250010.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set) CA5-DFS10-01. 3 / setsProtection for GP rear connectors (large and small for each of the 1).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. The MITSUBISHI A series PLC is connected to GP, length: 5 m.5 / setsFor the operation screen (5 pieces) (GP3000H standard) CA5-DFS10-01. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).USB cable to prevent disconnection of the fastening clip (5 / set)LT fasteners installed on the control panel (4 / set)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceConnector for connecting DC power cord (5)For connecting GP operation data with RS-422 and power /DIO terminals.Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (TFT)), replace the backlight (2 / set)I/O expansion module, including the 8 point relay /1 public endThe main body module and the separate display module are used for connecting the main machine module and the separate display module in thee DIN guide rail CA5-DFS10-01 CA5-DFS10-01. I/O module, including 32 point NPN/PNP inputA connector that connects the DIO interface for connecting an external I/O device (5 sets).