The main controller is connected to the man-machine interface for MPI communication
10.4 inches (TFT), replace the backlight (2 / set)Adapter for EX module (5 / set)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Suitable for LT4000M/GP4000M series modules, 3.5 inch.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)12 way 2 digital signals into analog signals and output resultsSuitable for LT4000M/GP4000M series modules, 5 CA3-MPI-PG1-PFE
CA3-MPI-PG1-PFE 7 inch. USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.(serial communication terminal adapter is included in the product package)12.1 inches, replaced by a host of backlight (1) CA3-MPI-PG1-PFE. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)7.4 inches, installed to provide the function of dust and moistureDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed in a variety of host and man-machine interface for RS-232C connectionUsed for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointLT4000M (module type analog), PNP output, DC24V (host) CA3-MPI-PG1-PFE. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connection10.4 inches and above, used to connect the power cord (5 / set).For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)Some types of PLC are not connected. Length: 5 meters.Standard cable for connecting GP30000H adapter and GP3000H CA3-MPI-PG1-PFE.
Length: 5 meters. For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Support CANopen from the station module, with a 12 point digital input, 6 pointt relay output and 2 point transistor PNP output CA3-MPI-PG1-PFE. Up to 7 EX modules can be connected.5.7 inches, installed to provide the function of dust and moisture