12 way 4 digital signals into analog signals and output resultsA veneer, for the GP4000 series back loading models of full flush (white, 1)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication CA3-CBL422-01 CA3-CBL422-01 Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)SD memory card (4GB, MLC, CLASS4) CA3-CBL422-01. For the elastic display module installation nut wrench (1 / set).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).12 way 2 digital signals into analog signals and output results7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets) CA3-CBL422-01. 10.4 inches and above, used to connect the power cord (5 / set).Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. USB cable to prevent disconnection of the fastening clip (5 / set)Used to install the human machine interface to the fixed panel (2 / cover).Standard cable for connecting GP3000H adapter and GP3000H.
Length: 110 meters CA3-CBL422-01. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).Touch panel operation for RGB input modules (Master - fromm: Mini-B)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) CA3-CBL422-01. The PC adapter for PCMCIA slot read CF card required.