Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).SP-5600WA+SP-5B40 combination.
Screen size: 12 inch widescreen (WXGA).
Multi touch: support.
Windows applications - -.
Application storage space: 64MB (CFast card).
Video / audio: support.
CFast card: 2.
SD card: 1.
USB interface Type-A:3.
USB interface Mini-B:1.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V.
SP-5600WA+SP-5B10 combination AGP3550-T1-AF
Screen size: 12 inch widescreen (WXGA).
Multi touch: -.
Windows applications - -.
Application storage space: 64MB (SD card).
Video / audio: -.
CFast card: -.
SD card: 2.
USB interface Type-A:2.
USB interface Mini-B:1.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V.
The intelligent man machine interface of the two Ethernet interface can be assigned a different IP address.
In this way, we can establish a network of high security between the office and the factory.
In addition, the collected data can be saved to NVRAM to avoid data loss.
Display module and host module free combination, function and size of flexible
6 Display Module 2 host module, can realize the 12 kinds of "intelligent man-machine interface".
Modular design, display module and the host module can be split, so that can be replaced."NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: No.
USB (host):1.
USB (device): none.
Built in DIO input: 16 points.
Built in DIO output: 16 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input, pulse output, PWM output.
Special DIO: No.
Expansion module EX module: up to 3.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Use EX GP-Pro to easily test and debug the project.
EX GP-Pro simulation is a kind of offline simulation function, with the help of this function,
No need to connect the man-machine interface, you can test the operation of the screen and the logic program.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Using remote monitoring software GP-Viewer or data acquisition software EX Pro-Server,
Can easily monitor the production scene of the man-machine interface screen, or release production orders and real-time data collection.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Connect various control devices.
Pro-face human machine interface can be connected to a variety of industrial controllers, including PLC, motion controller, robot and other equipment.
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operational performance.
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running. "
AGP3550-T1-AF Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=AGP3550-T1-AF&select=5